Spiral Binding Machine Price In India
One of the most common styles of punch and bind machines is the plastic comb binding which is mostly known as the GBC Binding. It is comparatively an easy process and it is almost the same as that of all the manual comb binding machines.
It is similar and it is easy to operate too. This machine has simple push-button control rather than a lever which is the common site for all other machines. There are simple methods by which the binding process is done by the plastic comb binding.
Select the Correct Size of Comb Binding Spine
At first, check the size guide to see the binding size which is required by you. This is necessary because the bind should be of the proper size hence it is important to check the size of the bind before starting off with the process. A comb binding which is too small will delay usability as well as the durability of the document as the pages are not going to turn freely and can ultimately rip off from the machine.
On the other hand, top quality comb bindings supplies that are too large are going to look awkward. It is will not function properly. It will not be well fitted to the comb binding machine.
The best way to judge the proper size of the comb binding to be used is the appearance of it and you can determine the exact size from the look too.
Pull or Push the Lever for Opening the Comb Binding Depending On the System
Most of the systems have only one lever which helps to operate the mechanism of punch by the machine by pulling forward the lever and it works as the comb binding opener by pulling it backward. Electric punches along with some manual systems have separate comb binding lever which is generally pulled towards the operator to have the same utility for both the machines.
Opening the comb binding at a long distance will cause the system to snap shut and also possibly fly off the whole system of the machine. It is important to open the binding to a level enough to fit all the pages into top quality comb bindings supplies. Make sure that the opener is closed from all the ways while the pages are being inserted for binding.
Bookbinding is the process of physically assembling a book of codex format from an ordered stack of paper sheets that are folded together into sections or sometimes left as a stack of individual sheets.
The stack is then bound together along one edge by either sewing with thread through the folds or by a layer of flexible adhesive. Alternative methods of binding that are cheaper but less permanent include loose-leaf rings, individual screw posts or binding posts, twin loop spine coils, plastic spiral coils, and plastic spine combs. For protection, the bound stack is either wrapped in a flexible cover or attached to stiff boards. Finally, an attractive cover adheres to the boards, including identifying information and decoration.
Book artists or specialists in book decoration can also greatly enhance a book’s content by creating book-like objects with the artistic merit of exceptional quality.